Audi 90 / Cabrio Application Chart
Updated 7 Sep. 2010
 

Years (US) and Model Name	1993-1995 Audi 90	1994-1999 Audi Cabriolet
Platform	B4	B3
Chassis Code (Check the 7th and 8th digits of the VIN Number)	8C	8G
Model Years (non-US)	1992-1994	1993-1999
Which Interface to Buy?	HEX-USB+CAN (USB) HEX-COM+CAN (Serial) KII-USB (USB) Micro-CAN (Will not work!) Also needed is a 2x2 adapter	HEX-USB+CAN (USB) HEX-COM+CAN (Serial) KII-USB (USB) Micro-CAN (Will not work!) Also needed is a 2x2 adapter for pre-1996 model year vehicles.
Module ID & Name
01 Engine	Y ('93-'94 TDI engines require a HEX Interface)	Y ('93-'94 TDI engines require a HEX Interface)
02 Auto Trans	Y (If equipped)	Y (If equipped)
03 ABS Brakes	Y (If equipped)	Y (If equipped)
08 HVAC	Y	Y
15 Airbags	Y	Y
22 All Wheel Drive	N (purely mechanical)	N (purely mechanical)
26 Auto Roof	N	Y (from MY 1995)
DLC Location	In fuse box under hood near firewall	In fuse box under hood near firewall -or- In Rear Ashtray -or- Under Dash
Bentley CD Available?	Yes (US/Canadian models only)	Yes (US/Canadian models only)
Where can I find information on this vehicle?	Try the AudiWorld forums.	Try the AudiWorld forums.
Y = Control Module is capable of Rapid Data Transfer (i.e. it "talks" to VAG-COM) N = Control Module (if it exists) is not capable of Rapid Data Transfer KWP-2000 = Control Module communicates using the new KWP-2000 Protocol (Otherwise, KWP-1281) 2nd K-wire = Control Module may exist on the 2nd K-wire (needs a Dual-K compatible interface) CAN = Uses Controller Area Network diagnostics, requires a CAN Interface Home      Products           VAG-COM            Support                 Car Info & Procedures                     Application Charts                           Audi 90 / Cabrio